6 |
P a g e
Operations Manual
Once the required torque settings for the Hydraulic Torque Wrench have been
established, set the pump to the correct pressure by loosening the lock nut
counter clockwise and turning the pressure regulator, then start the pump by
pushing down and holding the on button.
To adjust the pressure, turn the regulator clock wise, the pressure will be
visible on the gauge at all times. Adjust the regulator until the correct pressure
reached. Re-press and hold the on button to re-check the pressure is correct.
Always refer to the operations manual of your brand
and model of hydraulic torque wrench.
