Torqeedo BaseTravel 401 S Operating Manual Download Page 27

Page: 27 / 32

Operating Manual BaseTravel 401/801

11. Storage and care instructions 12. Trouble shooting

Unblock propeller

Put tiller into stop position. After

waiting for approx. 2 seconds,

re-start from the stop position

Plug in on/off pin and/or

steering cable

Check the polarity of the battery

connections and correct if neces-

sary (positive terminal on positive

pole, negative terminal on negati-

ve pole). Then change the fuse.

Connect the batteries according to
the connection plan (section 8.2 to

8.5). If necessary, clean the con-

tacts and treat them with contact

spray. Tighten the contacts.

Charge the batteries according to

the manufacturer‘s instructions.

Is the propeller unobstructed?

Is the propeller able to turn?

Is the battery sufficiently charged?

Battery voltage during operation

> 10 V (BaseTravel 401)

or > 20 V (BaseTravel 801)

Are the batteries correctly

connected? Are the contacts free

of corrosion and tightly fixed?

Is the fuse defective? Are traces

of smoldering visible at the fuse

viewing window?

Are the on/off pin and the

steering cable connected?

Motor not running?

yes

Contact Torqeedo Services (for

contact details, see back cover)

yes

12. Trouble shooting

Summary of Contents for BaseTravel 401 S

































Search results

Summary of Contents for BaseTravel 401 S

Reviews:

Related manuals for BaseTravel 401 S

Brands by name

Popular brands

Torqeedo BaseTravel 401 S, Operating Manual

Search results

Summary of Contents for BaseTravel 401 S

Reviews:

Related manuals for BaseTravel 401 S

Brands by name

Popular brands