8
1. Important information
• The cable set for third-party batteries is used to operate Torqeedo Cruise 10.0 motors
from 2021 onwards with batteries other than the Torqeedo Power 48-5000.
• We recommend using a fuse holder with busbar and M8 connections for installation.
• Torqeedo Cruise systems are designed to be earthed during installation. If required,
the system can be installed as an isolated system, which requires advanced knowledge
and compliance with national regulations.
Connection diagram
B1
Cruise 10.0 R / FP TorqLink with TorqLink throttle
B2
Cruise 10.0 R / FP TorqLink with aluminium throttle
B3
Cruise 10.0 T
B4
Cruise 10.0 R / FP TorqLink Twin
1a
Cruise 10.0 R / FP TorqLink (1240-20, 1241-20, 1242-20)
1b
Cruise 10.0 T (1243-20, 1244-20, 1245-20)
2a
TorqLink throttle (1976-00)
2b
Aluminium throttle (1949-00, 1950-00, 1951-00)
2c
Twin throttle (1952-00)
3a
TorqLink Terminator Single
3b
TorqLink Terminator Twin
4
Emergency stop switch
5a
On/off switch
5b
Key switch
6
TorqLink feeder cable (not with Cruise 10 T)
7
Feeder cable fuse: Round fuse type UL248-1.14, 2A
8
Mechanical main switch
9
Plus power cable
10
Minus power cable
11
Fuse holder with busbar – plus
12
Fuse holder with busbar – minus
13
Battery bank (set-up according to technical requirements)
14
Earthing point
