Figure 7
Step
7
Checking the Engine Oil
Level
No Parts Required
Procedure
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking Oil Level in
Operator’s Manual.
Step
8
Preparing the Side
Discharge Chute
No Parts Required
Procedure
1. Remove the plastic tie holding the side
discharge chute up and lower the chute into
place.
2. Check the spring at the discharge chute to
ensure proper operation.
Figure 8
Step
9
Checking the Hydraulic Oil
No Parts Required
Procedure
1. Start the engine and drive the machine forward
and backward for a few minutes to allow any
extra air to purge out of the hydraulic system.
2. Position the machine on a level surface.
3. Disengage the PTO, move the motion control
levers to the neutral locked position, and set
the parking brake.
5