25
2. Remove bracket pin (Fig. 15).
5
1
2
4
3
m–5599
Figure 15
1.
Z Stand
2.
Latch
3.
Bracket
4.
Bracket Pin
5.
Bottom of slot
1
2
3
m–5600
Figure 16
1.
Z Stand (Positioned in
slot)
2.
Crack in side walk or turf
3.
Latch resting on pivot tab
3. Raise latch. Swing stand foot out front and slide stand
toward machine, into the bottom of slot
(Fig. 15 and 16).
4. Set foot of stand on the ground and rest latch on pivot
tab (Fig. 16).
5. Start engine and put at half throttle.
Note: For best results, place foot of stand into seams in
sidewalks or into turf (Fig. 16).
6. Drive onto stand. Stop when latch drops over tab into
locked position (Fig. 16). Once onto stand, engage
parking brake. Shut off engine.
7. Chock or block the drive wheels.
Parking brake may not hold machine parked on
Z Stand and could cause personal injury or
property damage.
Do not park on Z Stand unless wheels are chocked
or blocked.
Warning
8. Perform maintenance.
9. Remove chocks or blocks.
Driving off the Z Stand
1. Raise latch to unlocked position (Fig. 17).
2. Start engine and place at half throttle. Disengage
parking brake.
3. Slowly drive backwards off of stand.
4. Return stand to its rest position (Fig. 15).
2
1
4
3
m–5601
Figure 17
1.
Z Stand
2.
Latch
3.
Locked position
4.
Unlocked position
