5
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Note:
Check the tire pressure before starting the
machine. Refer to your
Operator’s Manual
for the
correct tire type and procedure.
6
Servicing the Battery
No Parts Required
Procedure
Important:
Do not run the machine with the
battery disconnected; electrical damage may
occur to the engine.
1.
Charge the battery. Refer to the
Operator's
Manual
for instructions.
2.
Connect the negative battery cable.
Note:
If the positive cable is also disconnected,
connect the positive (red) cable to the positive
battery terminal first, then the negative (black)
cable to the negative battery terminal. Slip the
insulator boot over the positive terminal.
Note:
For MyRide machines, ensure that the
ground cable does not rub against the trailing
arm or lower shock mount (
).
g236732
Figure 2
1.
Ensure that the ground
cable does not rub against
the lower shock mount.
3.
Ground cable
2.
Ensure that the ground
cable does not rub against
the trailing arm.
3
