1
Removing the Machine
from the Crate
No Parts Required
Procedure
If removing the machine from a metal crate, refer to
the
Dealer/Distributor Portal
for further information.
2
Adding Fuel to the Machine
No Parts Required
Procedure
Add fuel to the machine before starting it. Refer
to your
Operator’s Manual
for the correct fuel and
procedure.
3
Checking the Engine-Oil
Level
No Parts Required
Procedure
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer
to Servicing the Engine-Oil Level in the
Operator's
Manual.
4
Servicing the Hydraulic
Fluid
No Parts Required
Procedure
This machine is shipped filled with hydraulic fluid in
the reservoirs.
Check the expansion tank; if necessary, add Toro
®
HYPR-OIL
™
500 hydraulic fluid, as recommended in
the
Operator's Manual
, to the FULL COLD line (
g037051
Figure 1
1.
Engine
2.
Expansion tank
2
