Toro Z Master 75990, Operator'S Manual

Page: 15 / 72

Product Overview
g029631
Figure 4
1. Side-discharge deflector 8. Rear shock assembly
2. Height-of-cut deck lift
pedal 9. Seat belt
3. Parking-brake lever 10. Fuel cap
4. Transport lock 11. Mower deck
5. Controls 12. Caster wheel
6. Motion-control levers 13. Front shock assembly
7. Roll bar
Controls
Become familiar with all the controls before you start
the engine and operate the machine (
Figure 4 and
Figure 5 ).
g008951
Figure 5
1. PTO switch 4. Hour
meter/Safety-interlock
display/Fuel gauge
2. Choke 5. Ignition switch
3. Throttle control 6. Fuses
Fuel Gauge
The fuel gauge is located with the hour meter, and the
bars light up when the ignition switch is on (
Figure 6 ).
The indicator light appears when the fuel level is
low—approximately 3.8 L (1 US gallon) remaining in
the fuel tank.
g008950
Figure 6
1. Fuel gauge (bars) 4. Safety-interlock symbols
2. Battery light 5. Low-fuel indicator light
3. Hour meter
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (
Figure 6 ).
Safety-Interlock Indicators
There are symbols on the hour meter and the indicate
with a black triangle that the interlock component is in
the correct position (
Figure 6 ).
Battery-Indicator Light
When the ignition key is initially turned to the R
UN
position for a few seconds, the battery voltage
appears where the hours normally appear.
The battery light turns on when you turn on the ignition
and when the charge is below the correct operating
level (
Figure 6 ).
Throttle Control
The throttle control is variable between F
AST
and
S
LOW
.
15