Procedure
Description
Qty.
Use
16
No parts required
–
Check the machine before delivery to
the customer.
Operator's Manual
1
Engine Owner's Manual
1
Registration Card
1
Operator training material
1
17
Key
2
Delivering the machine to the customer.
1
Removing Parts from the Crate
No Parts Required
Procedure
Remove the tires, the seat and the Rollover Protection
System (ROPS) Kit from the shipping crate.
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Note:
The front caster wheels may be semi-pneumatic
tires. Semi-pneumatic tires do not have a valve stem and
do not need to be checked.
Check the air pressure in the front tires and the rear tires.
Figure 1
3
Raising the Machine Up and
Installing the Rear Wheels
Parts needed for this procedure:
2
Rear wheels
Procedure
1. Remove the screws holding the right angle retaining
plate to the crate.
Figure 2
2. Raise the back of the machine up and support it with
jack-stands.
DANGER
Mechanical or hydraulic jacks may fail to
support the machine and cause a serious injury.
•
Use a jack stand(s) when supporting the
machine.
•
Do not use hydraulic jacks.
2
