Form No. 3372-979 Rev A
Z Master
®
Riding Mower
with 48in TURBO FORCE
®
Side Discharge Mower
Model No. 74141TE—Serial No. 312000001 and Up
Setup Instructions
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Remove parts from the crate.
2
No parts required
–
Check the tire pressure.
3
Rear wheels
2
Install the rear wheels.
4
Rollover Protection System Kit (ROPS)
1
Install the Rollover Protection System
(ROPS).
Seat
1
Seat plate
1
Guard
2
5
Flange nuts (5/16 inch)
8
Install the seat.
6
No parts required
–
Check the seat belt.
Right control lever
1
Left control lever
1
Bolt (3/8 x 1 inch) (2 are assembled)
7
Nut (3/8 inch)(2 are assembled)
Install the motion control levers.
Carriage bolt (3/8 x 1-1/2 inches)
1
8
Flange nut (3/8 inch)
1
Install the lift assist pedal.
Air cleaner cap
1
9
Hose clamp
1
Install the air cleaner cap.
10
No parts required
–
Charge and install the battery.
11
No parts required
–
Check the engine oil level.
12
No parts required
–
Add fuel to the machine.
13
Number 2 general purpose lithium base
or molybdenum base grease. (Purchase
separately.)
1 tube
Check the machine for grease.
14
No parts required
–
Prepare the side discharge chute.
15
No parts required
–
Test the safety interlock system.
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
