Product Overview
Figure 8
1.
Hood latch
3.
Cargo box
5.
Gear shift selector
7.
Cargo box lever
2.
Parking brake handle
4.
Towing tongue
6.
Fuel cap
Controls
Figure 9
1.
Steering wheel
5.
Accelerator pedal
2.
Cup holder
6.
Parking brake handle
(center console)
3.
Passenger handhold
7.
Operator's Manual
storage
tube
4.
Brake pedal
Accelerator Pedal
The accelerator pedal (
) gives the operator the ability
to vary the engine and ground speed of the machine when
the transmission is in gear. Pressing the pedal increases the
engine rpm and ground speed. Releasing the pedal decreases
the engine speed and ground speed of the machine.
Brake Pedal
The brake pedal is used to apply service brakes to stop or
slow the machine (
).
CAUTION
Brakes can become worn or can be incorrectly
adjusted resulting in personal injury.
If the brake pedal travels to within 25 mm (1 inch)
of the machine floor board, the brakes must be
adjusted or repaired.
Parking Brake
The parking brake is between the seats (
). Whenever
you shut off the machine, set the parking brake to prevent
the machine from accidental movement. To set the parking
brake, pull back the lever. To release the parking brake, push
the lever forward. If the machine is parked on a steep grade,
make sure that you set the parking brake.
16
