Accessing the Hood
Raising the hood
1.
Lift up the handle of the rubber latches at each side
of the hood (
).
Figure 24
2.
Raise the hood.
Closing the Hood
1.
Gently lower the hood onto the chassis.
2.
Secure the hood by aligning the rubber latches onto the
latch anchors at each side of the hood (
).
Removing the Seat Assembly
Push the seat assembly forward and lift the assembly upward
until the retainer brackets clear the seat-base panel (
).
Figure 25
1.
Seat-base panel
3.
Retainer brackets
2.
Seat assembly
Installing the Seat Assembly
Lower the seat assembly and ensure that the retainer brackets
latch into the seat-base panel (
Figure 26
1.
Seat-base panel
3.
Retainer brackets
2.
Seat assembly
29
Summary of Contents for WORKMAN GTX 07131
Page 46: ...Notes...
