Operation
15
Driving Forward or Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place the
throttle control in the “FAST” position for best
performance.
To go forward or backward, release the parking brake:
refer to Releasing the Parking Brake, page 11. Place
your foot on the traction control pedal and slowly
press on the top of the traction control pedal to move
forward or on the bottom of the traction control pedal
to move backward (Fig. 8). The farther you move the
traction control pedal in either direction, the faster the
machine will move in that direction.
To slow down, release the pressure on the traction
control pedal.
IMPORTANT: To avoid transmission
damage, always release the parking brake
before moving the traction control pedal.
1
2
1210
Figure 8
1.
Forward
2.
Backward
Stopping the Machine
To stop the machine, release the traction control
pedal, disengage the power take off (PTO), and turn
the ignition key to “OFF” to stop the engine. Also set
the parking brake if you leave the machine
unattended; refer to Setting the Parking Brake,
page 11. Remember to remove the key from the
ignition switch.
POTENTIAL HAZARD
•
Someone could move or attempt to operate
the tractor while it is unattended.
WHAT CAN HAPPEN
•
Children or bystanders may be injured if
they use the tractor.
HOW TO AVOID THE HAZARD
•
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.
