Toro wheel horse 16-38 HXL, Operator'S Manual

Page: 25 / 52

Maintenance
23
Greasing and Lubrication
Service Interval/Specification
Grease the machine after every 25 operating hours or
once a year, whichever occurs first. Grease more
frequently when operating conditions are extremely
dusty or sandy.
Grease Type: General-purpose grease.
How to Grease
1. Disengage the blade control (PTO), set the
parking brake, and turn the ignition key to
“OFF” to stop the engine.
2. Clean the grease fittings with a rag. Make sure to
scrape any paint off the front of the fitting(s).
3. Connect a grease gun to the fitting. Pump grease
into the fittings.
4. Wipe up any excess grease.
Where to Add Grease
1. Lubricate the front wheels until grease begins to
ooze out the bearings (Fig. 15).
2346
Figure 15
Tire Pressure
Service Interval/Specification
Maintain the air pressure in the front and rear tires at
20 psi (138 kPa). Check the pressure at the valve
stem after every 25 operating hours or yearly,
whichever occurs first (Fig. 16). Check the tires when
they are cold to get the most accurate pressure
reading.
1
1872
Figure 16
1. Valve stem