solvent, gas, or kerosene. Replace the paper
element if it is damaged or cannot be cleaned
thoroughly.
Servicing the Engine Oil
Oil Type:
Detergent oil (API service SF, SG, SH, SJ,
or SL)
Crankcase Capacity:
1.9 qt (1.8 l), [when oil filter is
removed: 2.2 qt (2.1 l)]
Viscosity:
See the table below.
SAE V iscosity Grades
SAE 40
SAE 30
SAE 10W
–
30/ SAE 10W
–
30
-20
0
20
32
40
60
80
100
-30
-20
-10
0
10
20
30
40
°F
°C
STARTING TEMPERA TURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
SAE 5W
–
20
G010686
Figure 36
Note:
Using multi grade oils (5W-20, 10W-30, and 10W
-40) will increase oil consumption. Check oil level more
frequently when using them.
Checking the Engine Oil Level
Service Interval:
Before each use or daily
Note:
Check the oil when the engine is cold.
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away the muffler and other hot surfaces.
Important:
Do not overfill the crankcase with oil
because damage to the engine may result. Do not
run engine with oil below the low mark because the
engine may be damaged.
1. Park the machine on a level surface, disengage the
blade control switch, stop the engine, engage parking
brake, and remove the key.
2. Make sure the engine is stopped, level, and is cool so
the oil has had time to drain into the sump.
3. To keep dirt, grass clippings, etc., out of the engine,
clean the area around the oil fill cap/dipstick before
removing it.
4. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 37).
G009950
G008792
1
2
5
6
7
3
9
10
4
8
Figure 37
Changing the Engine Oil
Service Interval:
After the first 8 hours—Change the
engine oil.
Every 100 hours—Change the engine
oil. (more often in dusty, dirty
conditions)
32
Summary of Contents for TITAN ZX6050
Page 11: ...117 1164 1 Fuel 2 Full 3 Half 4 Empty 11...
Page 53: ...Schematics G012083 Wire Diagram Rev A 53...
Page 54: ...Notes 54...
Page 55: ...Notes 55...
