If needed, remove the upper bolt, washer and nut and
raise the motion control levers to the upright position.
Secure the motion control levers. Refer to Adjusting the
Motion Control Levers in the Operation Section.
Raising the ROPS
Raise the ROPS into the upright position and secure it
in place. Refer to Using the Rollover Protection System
(ROPS) in the Operation Section.
Checking the Tire Pressure
Check the front and rear tires for proper inflation. Refer
to Checking the Tire Pressure in the
Operator's Manual
for the recommended inflation pressure.
Checking the Side Discharge Chute
Remove the packing restraint holding the side discharge
chute up and lower the chute into place.
Checking the Engine Oil Level
Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to Checking
the Oil Level in the
Operator's Manual
.
Checking the Hydraulic Oil Level
Before you start the engine and use the machine, check
the hydraulic oil level in the reservoir behind the seat;
refer to Checking the Oil Level in the
Operator's Manual
.
Review the Remaining Parts
Keep all the following items with the machine:
•
Ignition Key
•
Hose coupling
•
Operator's Manual
•
Engine Operator's Manual
•
View the Operator training material before operating
the machine.
14
