g024411
Figure 46
1.
Fuse block
2.
30 amp main fuse
Important:
Ensure that the new fuses are
the same type and amperage as the fuses
removed.
2.
To replace the engine fuse, remove the console
from the plastic fender.
g024412
Figure 47
1.
Engine fuse
3.
Grasp the engine fuse and pull it straight and
away from the fuse block (
).
4.
Align a new fuse with the slot in the fuse block
(
).
5.
Push the fuse into the fuse block until the fuse
is seated (
).
Drive System
Maintenance
Checking the Tire Pressure
Service Interval:
Every 25 hours—Check tire
pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven
cut. Check the pressure at the valve stem (
).
Check the tires when they are cold to get the most
accurate pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
Inflate the rear drive wheel tires to 89.6 kPa (13 psi).
g000554
Figure 48
1.
Valve stem
40
