9
Preparing the Machine
Installing the Weight
The bagger adds a lot of weight to the rear of the
machine and may cause an unstable condition
which could result in a loss of control.
•
Install the front weight.
Caution
Attach the weight to the front of the machine with two
bolts (3/8 x 2-1/4 inch), four washers (3/8 inch), and two
locknuts (3/8 inch) as shown in Figure 13.
2
4
m–6686
5
4
3
1
Figure 13
1. Footrest frame
2. Bolt, 3/8 x 2-1/4 inch
3. Front weight
4. Washer, 3/8 inch
5. Nut, 3/8 inch
Installing the Bagger Support Assembly
Attach the bagger support assembly to the machine frame
with four bolts (3/8 x 1 inch), four washers (3/8 inch), and
four locknuts (3/8 inch) as shown in Figure 14.
1
2
5
4
3
m–6686
Figure 14
1. machine frame
2. Support
3. Bolt, 3/8-16 x 1 inch
4. Washer, 3/8 inch
5. Locknut, 3/8 inch
