RELEASED Ver-C ©Toro 2016
5
Installing the Grass Deflector
Parts needed for this procedure:
1
Grass deflector (if not installed)
Procedure
If the grass deflector is not installed, remove it from the
packaging and install it onto the mower deck. Refer to your
Operator’s Manual
for the correct procedure to install the grass
deflector.
6
Checking the Mower
Adjustment
No Parts Required
Procedure
Adjust the side-to-side level and the front-to-rear blade slope.
Use the relevant procedures in the
Operator's Manual
to verify
that the deck is level, and make any adjustments as necessary.
Refer to the
Operator's Manual
for more information.
7
Completing the Setup
Parts needed for this procedure:
1
Ignition key
1
Hose coupling (not included with CE models)
1
Operator's Manual
1
Engine Owner’s Manual
(non-Toro engines)
1
KeyChoice
®
key (blue)
Procedure
Checking the Tire Pressure
Check the front and rear tires for proper inflation; refer to
Checking the Tire Pressure in the
Operator's Manual
for the
recommended inflation pressure.
Checking the Side-Discharge Chute
Remove the packing restraint holding the side discharge chute
up and lower the chute into place.
Checking the Engine-Oil Level
Before you start the engine and use the machine, check the
oil level in the engine crankcase; refer to Checking the Oil
Level in the
Operator's Manual
.
Keep all the following items with the machine:
•
Ignition key
•
KeyChoice key (blue)
•
Hose coupling (not included in CE models)
•
Operator's Manual
•
Engine Owner’s Manual
(non-Toro engines)
5
