Toro TimeCutter HD X5450, Operator'S Manual

Page: 37 / 60

5. Change the engine-oil filter ( Figure 48 ).
Note:
Ensure that the oil-filter gasket touches the
engine and then turn the filter an extra 3/4 turn.
B A
C D
E
F
3/4
g027477
g027477
Figure 48
6. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the
Full mark ( Figure 49 ).
g193530
Figure 49
Servicing the Spark Plug
Service Interval: Every 100 hours/Yearly (whichever comes
first)—Check the spark plug(s).
Every 200 hours/Every 2 years (whichever comes
first)—Replace the spark plug(s).
Make sure that the air gap between the center and side
electrodes is correct before installing the spark plug. Use
a spark-plug wrench for removing and installing the spark
plug(s) and a gapping tool/feeler gauge to check and adjust
the air gap. Install a new spark plug(s) if necessary.
Type: Champion ® RN9YC or NGK ® BPR6ES
Air gap: 0.76 mm (0.03 inch)
Removing the Spark Plug
1. Disengage the PTO and ensure that the parking brake
is engaged.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
37