Starting the Engine
1.
Pull the blade-control bar to the handle and hold it (A of
).
2.
Pull the recoil-start handle (B of
) lightly until you feel resistance, then pull it sharply, and allow it
to return to the rope guide on the handle slowly.
g231913
Figure 14
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (
).
g233423
Figure 15
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.
Shutting Off the Engine
Service Interval:
Before each use or daily
To shut off the engine, release the blade-control bar.
Important:
When you release the blade-control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop
using your machine immediately and contact an
Authorized Service Dealer.
13
Summary of Contents for Super Recycler 21381
Page 28: ......
