Toro Super Recycler 20792, Manual

Page: 14 / 120

Starting the Engine Using the
Recoil-Start Handle
1. Hold the blade-control bar against the handle
(
Figure 17 ).
g009546
Figure 17
1. Blade-control bar
2. Pull the recoil-start handle ( Figure 18 ).
g009548
Figure 18
Note:
When you pull the recoil-start handle,
pull it lightly until you feel resistance, then pull it
sharply (
Figure 18 ). Allow the rope to return to
the handle slowly.
Note:
If the machine does not start after several
attempts, contact an Authorized Service Dealer.
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (
Figure 19 ).
g009549
Figure 19
Note:
If the machine does not freely roll backward
after self-propelling, stop walking, hold your hands
in place, and allow the machine to roll a couple of
centimeters (inches) forward to disengage the wheel
drive. You can also try reaching just under the upper
handle to the metal handle and pushing the machine
forward a couple of centimeters (inches). If the
machine still does not roll backward easily, contact an
Authorized Service Dealer.
13