Toro Super Recycler 20382, Operator'S Manual

Page: 15 / 72

g010084
Figure 26
1. Lever 2. Tabs
Note:
To unlock the plug, rotate the lever on
the plug to the right ( Figure 26 ).
5. Lower the discharge deflector.
Side-Discharging the
Clippings
Use the side-discharge feature for cutting very tall
grass.
If the bag is on the machine, remove it and insert the
rear-discharge plug; refer to
Removing the Grass Bag
(page 13) before side-discharging the clippings.
Important:
Ensure that the rear-discharge plug
is locked in place. To lock the plug: Raise the
discharge deflector (
Figure 27 ), firmly push the
plug in until it snaps into place behind the tabs,
and rotate the lever on the plug to the left (
Figure
26 ).
g017463
Figure 27
1. Discharge deflector 2. Rear-discharge plug
Note:
To unlock the plug, rotate the lever on the plug
to the right ( Figure 26 ).
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts
to stop before leaving the operating position.
Installing the Side-Discharge
Chute
1. Unlock the side-discharge door ( Figure 28 ).
g002590
Figure 28
2. Lift open the side-discharge door ( Figure 29 ).
g002591
Figure 29
3. Install the side-discharge chute and close the
door onto the chute (
Figure 30 ).
14