Figure 7
1. Starter rope
2. Rope guide
2. Filling the Engine with Oil
Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 8).
Figure 8
2.
Slowly
pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 8).
Do not
overfill.
(Max. fill: 20 oz. (0.59 l), type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important:
Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.
Product Overview
Figure 9
1. Recoil start handle
6. Primer
2. Handle knob (4)
7. Spark plug
3. Fuel tank cap
8. Cutting height lever (4)
4. Side discharge
9. Oil ll/Dipstick
5. Air lter
10. Blade control bar
Figure 10
1. Side discharge chute
2. Rear discharge plug (installed)
5
