Toro Super Bagger, Operator'S Manual

Page: 13 / 104

g010266
Figure 22
2. Turn the fuel valve lever to the O
N
position
(Figure 20).
g002896
Figure 23
3. Pull the recoil starter ( Figure 24 ).
g010489
Figure 24
Note:
If the machine still does not start, contact
an Authorized Service Dealer.
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you.
Shutting Off the Engine
Hold down the ignition switch in the S
TOP
position until
the engine shuts off.
Important:
When you release the blade-control
bar, the engine should shut off and the blade
should stop within 3 seconds. If they do not, stop
using your machine immediately and contact an
Authorized Service Dealer.
Engaging the Blade
When you start the engine the blade does not turn.
You must engage the blade to mow.
1. Push the blade-control button and pull the
blade-control bar to the handle (
Figure 25 ).
g010491
Figure 25
2. Hold the blade-control bar against the handle
(
Figure 26 ).
g010492
Figure 26
12