Toro Reelmaster 5510 Series, Service Manual

Page: 30 / 662

Special Tools
You can order these special tools from your Toro Distributor. Some tools may
also be available from a local tool supplier.
Hydraulic Pressure Testing Kit
Toro Part No. TOR47009
Use this kit to take various pressure
readings for diagnostic tests. Quick
disconnect fittings are provided to attach
directly to the mating fittings on the
machine test ports without the tools. A
high-pressure hose is given for remote
readings. Contains 1 each: 6,900 kPa
(1,000 psi), 34,500 kPa (5,000 psi), and
69,000 kPa (10,000 psi) gauges.
57 LPM (15 GPM) Hydraulic Tester Kit
Toro Part No. TOR214678
Use this tester to test the hydraulic circuits
and components for flow and pressure
capacities. The tester flow measurement
maximum is 57 LPM (15 GPM). This tester
includes the following:
Inlet Hose – This hose connects the
system circuit to the inlet side of the
hydraulic tester.
Load Valve – Turn the valve to restrict the
flow to create a simulated working load in
the circuit.
Pressure Gauge – A glycerine filled
pressure gauge 0 to 34,500 kPa (0 to 5,000
psi) to provide operating circuit pressure.
Flow Meter – This meter measures the
actual fluid flow in the operating circuit with
a gauge rated at 5 to 55 LPM (1 to 15
GPM).
Outlet Hose – A hose from the outlet side
of the hydraulic tester that connects to the
hydraulic system circuit.
Fittings – An assortment of hydraulic
fittings are included with this kit.
Specifications and Maintenance: Special Tools Page 2–12 Reelmaster ® 5410/5510/5610 Series
15216SL Rev C