Radiator and Oil Cooler Assembly
g229318
Figure 51
1.
Coolant reservoir
12.
Flange-head screw (14 each)
23.
Screen
2.
Hose clamp (2 each)
13.
Reservoir bracket
24.
O-ring
3.
Button-head screw (5 each)
14.
Upper radiator hose
25.
O-ring
4.
Hydraulic fitting (2 each)
15.
Lower radiator hose
26.
Detent ball pin
5.
Foam seal (2 each)
16.
Fan shroud
27.
Overflow hose
6.
Mounting bracket (2 each)
17.
Pop rivet (2 each)
28.
Foam seal (4 each)
7.
Foam seal (2 each)
18.
Flange-head screw (4 each)
29.
Draincock
8.
Flange nut (10 each)
19.
Draw latch
30.
Radiator cap
9.
Hose clamp (4 each)
20.
Washer-head screw (6 each)
31.
Reservoir cap
10.
Radiator and oil cooler assembly
21.
Foam seal (2 each)
32.
Plug
11.
Radiator frame
22.
Foam seal
Removing the Radiator and Oil Cooler Assembly
1. Park machine on a level surface, lower cutting units, stop engine, engage
parking brake and remove key from the key switch.
2. Unlatch screen (item 23 in
) at rear of machine. Lift screen from
hinges and remove screen from machine.
3. Raise and support hood.
Reelmaster
®
5410/5510/5610 Series
Page 5–17
Kubota Gasoline Engine: Service and Repairs
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
