Toro Reelmaster 3555, Operator'S Manual, Page: 28 / 76

Checking the Parking Brake
Service Interval: Before each use or daily
1. Start the engine, raise the cutting units,
disengage the parking brake, and move the
machine to an open flat area.
2. Engage the parking brake ( Figure 32 ).
g332418
Figure 32
3. Press the traction pedal to move the machine
forward.
Note:
If the machine moves forward with the
parking brake engaged, adjust parking brake;
refer to
Adjusting the Parking Brake (page 52) .
Note:
Moving the machine forward with the
parking brake engaged will cause the engine to
shut off.
4. If you adjusted the parking brake, repeat steps
2 and 3 .
Note:
If the machine moves forward with the
parking brake engaged: service the parking
brakes, check left and right brake linkage for
damage, and check the brake lever pivot for
damage; refer to
Servicing the Parking Brakes
(page 52) .
5. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operator’s seat.
Adjusting the Seat
g010515
Figure 33
1. Backrest knob
3. Seat-suspension knob
2. Seat-position adjustment
lever 4. Armrest-adjusting knob
Changing the Seat Position
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. Move the lever sideways to unlock the seat
(
Figure 33 ).
2. Slide the seat to the desired position and release
the lever to lock it in position.
Changing the Seat Suspension
You can adjust the seat to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
To adjust the seat, turn the front knob in either
direction to provide the best comfort (
Figure 33 ).
28