Toro Reelmaster 3555, Operator'S Manual, Page: 23 / 76

Parking Brake
Whenever the engine is shut off, engage the parking
brake (
Figure 27 ) to prevent accidental movement of
the machine. To engage the parking brake, pull up
on the lever; to disengage the brake, push down the
lever.
Note:
The engine shuts off if you press the traction
pedal with the parking brake engaged.
Diagnostic Light
The diagnostic light ( Figure 27 ) illuminates if the
system recognizes a system fault.
Power Point
The power point is located at the outboard side of the
control console. Use the power point to power 12 V
electronic devices (
Figure 28 ).
g019983
Figure 28
1. Power point
Fuel Gauge
The fuel gauge ( Figure 29 ) indicates the amount of
fuel in the tank.
g019982
Figure 29
1. Fuel gauge
Mower Manifold
The mower manifold is located under the platform
cover.
g020248
Figure 30
1. Backlap lever 2. Reel speed control knob
Reel Speed Knob
Use the reel speed knob of the mower manifold to
adjust the clip rate (reel speed) of the cutting units
(
Figure 30 ).
•
Turn the reel speed knob counterclockwise to
increase the reel speed.
•
Turn the knob clockwise to slow the reel speed.
Refer to Clip Rate (Reel Speed) (page 33) and Setting
the Reel Speed (page 34) for information on how to
adjust the reel speed control.
23