![Toro Reelmaster 3550-D Preliminary Service Manual Download Page 22](http://html.mh-extra.com/html/toro/reelmaster-3550-d/reelmaster-3550-d_preliminary-service-manual_1132168022.webp)
Reelmaster 3550--D
Hydraulic System
Page 4 -- 4
General Information
Operator’s Manual
The Traction Unit and Cutting Unit Operator’s Manuals
provide information regarding the operation, general
maintenance and maintenance intervals for your Reel-
master machine. Refer to these publications for addi-
tional information when servicing the machine.
Towing Traction Unit
IMPORTANT: If towing limits are exceeded, severe
damage to the piston pump may occur.
If it becomes necessary to tow (or push) the machine,
tow (or push) in a
forward direction only
, at a speed
below 3 mph (4.8 kph)
and for a very short distance.
The piston (traction) pump is equipped with a bypass
valve that needs to be turned 90
o
for towing (Fig. 1). Do
not turn bypass valve when engine is running.
See Traction Unit Operator’s Manual for additional tow-
ing procedures.
1. Bypass valve location
Figure 1
1
Check Hydraulic Fluid
The Reelmaster 3550--D hydraulic systems are de-
signed to operate on anti--wear hydraulic fluid. The res-
ervoir holds approximately 3.5 U.S. gallons (13.2 liters)
of hydraulic fluid.
Check level of hydraulic fluid daily.
NOTE:
Use only hydraulic fluids specified in the Trac-
tion Unit Operator’s Manual. Other fluids may cause
system damage.
Figure 2
1. Hydraulic reservoir
2. Reservoir cap
1
2
Summary of Contents for Reelmaster 3550-D
