Toro Recycler 21762, Operator'S Manual

Page: 18 / 28

g033492
Figure 20
1. Washout port
6. Turn the water on.
7. Start the engine and run it until the clippings no
longer come out from under the machine.
8. Shut off the engine.
9. Shut off the water and disconnect the garden
hose from the machine.
10. Start the engine and run it for a few minutes to
dry the underside of the machine to prevent it
from rusting.
11. Shut off the engine, remove the electric-start
button (if equipped), and allow the machine to
cool before storing it in an enclosed area.
Folding the Handle
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the electric-start button (if equipped);
refer to
Figure 21 .
g035929
Figure 21
1. Electric starter 2. Electric-start button
2. Remove and save the 2 handle knobs and 2
carriage bolts from the handle brackets (
Figure
22 ).
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
g032869
Figure 22
1. Handle knob
2. Carriage bolt
3. Fold the handle by rotating it forward ( Figure 23 ).
18