
Recycling the Clippings
Your machine comes from the factory ready to recycle
the grass and leaf clippings back into the lawn.
If the grass bag is on the machine, remove it;
refer to
Removing the Grass Bag (page 12)
. If the
side-discharge chute is on the machine, remove it;
refer to
Removing the Side-Discharge Chute (page
.
Bagging the Clippings
Use the grass bag when you want to collect grass and
leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove
it; refer to
Removing the Grass Bag (page 12)
.
Installing the Grass Bag
1.
Raise and hold up the rear deflector (
).
g189796
Figure 15
1.
Notches
3.
Grass bag pin (2)
2.
Rear door
2.
Install the grass bag, ensuring that the pins on
the bag rest in the notches on the handle (
3.
Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps above.
12
Summary of Contents for Recycler 20377
Page 6: ...4 Assembling the Grass Bag No Parts Required Procedure g235791 Figure 6 6 ...
Page 21: ...Notes ...
Page 22: ...Notes ...
Page 24: ......