Toro Recycler 20372, Operator'S Manual, Page: 14 / 28

Starting the Engine
You can start the engine using either the electric-start button (if equipped) or the recoil-start handle.
Starting the Engine Using the Electric-Start Button
For Electric-Start Models
1. Hold the blade-control bar against the handle (A of Figure 14 ).
Note:
If the electric-start button has been removed, insert it in the electric starter (B of Figure 14 ).
2. Push the electric-start button until the engine starts (C of Figure 14 ).
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
g239637
Figure 14
Starting the Engine Using the Recoil-Start Handle
1. Hold the blade-control bar against the handle ( Figure 15 ).
2. Pull the recoil-start handle ( Figure 15 ).
Note:
When you pull the recoil-start handle, pull it lightly until you feel resistance, then pull it sharply
( Figure 15 ). Allow the rope to return to the handle slowly.
Note:
If the machine does not start after several attempts, contact an Authorized Service Dealer.
g233422
Figure 15
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the machine will automatically keep pace
with you (
Figure 16 ).
14