43
3. Remove the locknut, bolt, spring, and spacer that hold
the deflector to the mounts (Fig. 61).
2
4
3
1
5
m-3781
6
Figure 61
1.
Deflector
2.
Bolt
3.
Deflector mount
4.
Spring
5.
Spacer
6.
Locknut
4. Straighten the deflector mounts if they are bent
(Fig. 61).
5. Install a new deflector between the mounts with a
spacer and a spring.
6. Hook the front end of the spring around the front
deflector mount.
7. Insert the bolt through the spacer and secure it with a
locknut.
8. Ensure that there is downward spring force on deflector
(Fig. 61).
9. Tighten the bolt and locknut until they lightly contact
the pivot brackets (Fig. 61).
Important
The grass deflector must be spring-loaded in
the down position. Lift the deflector up to check that it
snaps to the fully down position.
Wiring Diagram
TRANSMISSION
D
B
E
F
C
BROWN
BLUE
ORANGE
YELLOW
GREEN
RED
BLACK
RED
BLACK
OPC SWITCH
KEY SWITCH
ENGINE
BLADE
SWITCH
