![background image](http://html1.mh-extra.com/html/toro/proline-30437/proline-30437_operators-manual_1133866031.webp)
31
m–6529
Figure 37
Checking the Tire Pressure
Service Interval/Specification
Maintain the air pressure in the front and rear tires as
specified. Check the pressure at the valve stem after every
40 operating hours or monthly, whichever occurs first
(Fig. 38). Check the tires when they are cold to get the most
accurate pressure reading.
Rear Tire Pressure: 12–14 psi (83–97 kPa)
Caster Tire Pressure: 25–30 psi (172–207 kPa)
2
1
m–6367
Figure 38
1.
Rear Tire
2.
Caster tire
Servicing the Fuse
Service Interval/Specification
The electrical system is protected by a fuse. It requires no
maintenance. If the fuse blows check component or circuit
for malfunction or short. To replace fuse, pull out on the
fuse (Fig. 39) and push in new fuse.
1
m–7676
Figure 39
1.
Fuse, 10 amp blade type
Adjusting the Electric Clutch
The clutch is adjustable to ensure proper engagement and
proper braking. Check adjustment after every 100 hours of
operation.
1. To adjust the clutch, tighten or loosen the lock nuts on
the flange studs (Fig. 40).
2. Check adjustment by inserting a feeler gauge thru the
slots next to the studs (Fig. 40).
3. The proper disengaged clearance between the clutch
plates is 0.012–0.024 inch (0.30-0.60 mm). It will be
necessary to check this clearance at each of the three
slots to ensure the plates are parallel to each other.