Figure 3
1.
Link assembly
4.
26.27 to 28.11 inches
2.
Support arm
5.
Aerator mounting tabs
3.
Mounting tabs outside
C. Mount a link pin assembly to each support arm
and aerator mounting tab with a washer and 2
jam nuts (Figure 4).
Figure 4
1.
Link pin assembly
4.
Washer
2.
Aerator mounting tab
5.
Jam nuts
3.
Support arm
6.
Optional mounting hole
2. Loosely mount the support arms to the hitch cross
with 8 screws (1/2 x 4 inch), 16 washers and 8
locknuts. Position as shown in Figure 5.
Figure 5
1.
Hitch cross
2.
Support arm
3. Secure the lower hitch cross tab to the aerator
bracket with link pin and lynch pin (Figure 6).
Figure 6
1.
Lower hitch cross
3.
Lynch pin
2.
Link pin
4.
Aerator bracket
4. Tighten the nuts securing the hitch cross to the
support tubes.
5. Insert the right and left lower link arms onto the link
pins and secure with lynch pins (Figure 7).
Figure 7
1.
Lower link arms
2.
Lynch pins
3
Summary of Contents for ProCore 09753
Page 7: ...Notes 7...
