Toro Pro Force Debris Blower, Installation Instructions

Page: 2 / 4

2
Installing the 10 Gallon Tank
No Parts Required
Procedure
1. Drill 4 holes (3/8 inch) in the existing fuel tank tray as
shown in
Figure 2 .
Figure 2
1. 2.18 cm (0.86 inch) 3. 2.03 cm (0.80 inch)
2. Drill here. 4. 2.79 cm (1.10 inches)
2. Attach the new fuel-tank tray to the existing fuel-tank
tray and secure it with 4 flange-head bolts (5/16 inch)
and 4 flange nuts (5/16 inch) through the holes in the
tray (
Figure 3 ).
Figure 3
1. Flange nut (5/16 inch) 3. New fuel-tank tray
2. Flange-head bolt (5/16
inch)
3. Attach the carbon-canister bracket to the frame using 2
bolts (1/4 inch) and 2 flange nuts (1/4 inch) as shown
in
Figure 4 .
Note:
If the bracket does not perfectly line up with
the existing holes, widen them slightly using a 7 cm
(0.281 inch) drill bit.
Figure 4
1. Flange nut (1/4 inch) 3. Bolt (1/4 inch)
2. Carbon-canister bracket
4. Secure the carbon canister to the carbon-canister
bracket using the canister strap and 2 carriage bolts and
flange nuts (3/8 inch) as shown in
Figure 5 .
Figure 5
1. Carbon-canister bracket 4. Canister strap
2. Flange nut (3/8 inch) 5. Carbon canister
3. Carriage bolt
2