DANGER
Battery electrolyte contains sulfuric acid,
which is fatal if consumed and causes
severe burns.
•
Do not drink electrolyte and avoid
contact with skin, eyes or clothing.
Wear eye protection and rubber
gloves.
•
Fill the battery where clean water is
always available for flushing the skin.
2.
Attach the positive cable (red cable) to the
positive (+) terminal.
3.
Attach the negative cable (black cable) to the
negative (-) terminal of the battery.
4.
Coat the terminals and mounting fasteners with
Grafo 112X (skin over) grease (Toro Part No.
505-47) to prevent corrosion.
5.
Install the battery cover and secure with the
clips.
2
Mounting the Hitch to the
Machine
Parts needed for this procedure:
1
Machine assembly
1
Hitch
2
Bolt (3/8 x 3 inches)
2
Flange nut (3/8 inch)
Procedure
1.
Position the machine on a flat, level surface.
2.
Insert the hitch tube into the frame brackets
(
). Secure the tube to the frame with 2
bolts (3/8 x 3 inches) and flange nuts (3/8 inch).
g020731
Figure 4
1.
Frame brackets
2.
Hitch tube
3.
Route the wire harness along the right side of
the hitch tube (
).
g020732
Figure 5
1.
Wire harness
2.
Harness clips
4.
Plug the harness clips into the holes in the side
of the hitch tube to secure it (
).
5.
Store the harness connector in the hitch tube
holster (
).
9
Summary of Contents for Pro Force 44553
Page 41: ...Notes ...
Page 44: ......
