Removing the Battery Pack
1.
Place the chain saw on a flat surface.
2.
Press down on the latch and remove the battery
pack from the cavity.
g192109
Figure 22
1.
Latch
Charging the Battery Pack
Important:
Read all safety precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Specifications (page 8)
.
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1.
Make sure that the vents on the battery pack are
clear of any dust and debris.
2.
Line up the cavity in the battery pack (
with the tongue on the charger.
g228487
Figure 23
1.
Battery pack cavity
4.
Battery-charge-indicator
button
2.
Battery pack terminals
5.
LED indicators (current
charge)
3.
Battery pack venting areas
3.
Make sure that the vents on the battery charger
are clear of any dust and debris.
4.
Slide the battery pack into the charger until it is
fully seated (
g194423
Figure 24
1.
Charger venting areas
3.
Right indicator light
2.
Left indicator light
5.
To remove the battery pack, slide the battery
backward out of the charger.
6.
Refer to the following table to interpret the LED
indicators on the battery charger.
14
