Toro Power Plex 51690, Operator'S Manual

Page: 6 / 12

Operation
WARNING
The blower can throw debris, possibly causing
serious personal injury to you or bystanders.
• Do not blow hard objects, such as nails, bolts,
or rocks.
• Do not operate the blower near bystanders or
pets.
• Use extra care when cleaning debris from stairs
or other tight areas.
• Wear safety goggles or other suitable eye
protection, long pants, and shoes.
Starting the Blower
1. Make sure that the vents on the blower are clear of any
dust and debris.
2. To start the blower, squeeze the variable-speed trigger
(
Figure 4 ).
Note:
Engage the speed lock to keep the machine on
without pressing the variable-speed trigger ( Figure 4 ).
g194437
Figure 4
1. Speed lock 4. Battery latch
2. Turbo boost button 5. Blower venting areas
3. Variable-speed trigger
Adjusting the Air Speed of the
Blower
To accelerate the blower speed, press and hold the turbo
boost button for the desired amount of time (
Figure 4 ).
Stopping the Blower
To stop the blower, disengage the speed lock (if in use) and
release the variable-speed trigger (
Figure 4 ).
Removing the Blower Tube
Press down on the tab to separate the blower tube from the
blower (
Figure 5 ).
g190104
Figure 5
Removing the Battery from the
Blower
Press down on the battery latch to separate the battery from
the blower (
Figure 6 ).
g194150
Figure 6
1. Battery latch
6