Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Mount the battery charger (optional).
2
Connector knob
1
Unfold the handle.
3
Auxiliary handle
1
Install the auxiliary handle.
Guard
1
4
Phillips head screw
4
Install the guard.
Note:
The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer
to
Charging the Battery Pack (page 10)
.
1
Mounting the Battery
Charger (Optional)
No Parts Required
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to
for assistance in mounting the
charger.
Note:
Slide and twist the charger over the
appropriately positioned hardware to secure the
charger in place (hardware not included).
g194202
Figure 1
6