Installing the myTurf™
Wireless Hour Meter
Important:
The wireless hour meter has a 16 V
DC maximum.
Install a wireless hour meter in place of an existing
hour meter on each machine in the fleet. Hour meters
are installed with varying styles of mounts and bezels.
Take care when removing the existing hour meter to
retain all the fasteners and bezels.
In most cases, hour meters are installed on
dashboards for ease of reading, but some machines
have them installed elsewhere. If you cannot find the
hour meter, consult the
Operator’s Manual
or log on to
www.Toro.com for help locating it.
1.
On the new wireless hour meter, record the
device ID from the label and machine model
and serial number in the space provided on this
document.
Note:
This information is necessary for
registration at myTurf.com.
2.
Record the hours listed on the existing hour
meter in the space provided.
3.
Remove the existing hour meter from its
mounting frame and disconnect it from the wire
harness.
4.
Install the new wireless hour meter into the
same position.
There are optional configurations, so the choose
the configuration that applies to your application
(
Figure 13
).
g211215
Figure 13
1.
ID label
4.
Square front held
2.
Square back held
5.
Terminals
3.
Round back and front held
9