Toro Multi Pro WM 41240, Operator'S Manual

Page: 68 / 84

g028532
Figure 90
1. Flange (pressure filter
head) 5. Gasket
2. Manifold (agitation valve) 6. 3-pin connector (valve
actuator—agitation valve)
3. Flange (bypass
valve—agitation valve) 7. Flange (master boom
valve)
4. Clamp
2. Remove the flanged-head bolt and flanged
locknut that secures the agitation valve to the
valve mount and remove the valve manifold from
the machine (
Figure 91 ).
g028533
Figure 91
1. Flanged-head bolt 3. Valve mount
2. Manifold (agitation valve) 4. Flanged locknut
Removing the Master Boom
Manifold Valve
1. Remove clamps and gaskets that secure the
manifold for the master boom valve (
Figure 92 )
to the master boom bypass valve, agitation
valve, and 90° flanged elbow (at the end of the
hose for the flow meter).
Note:
Retain the clamp(s) and gasket(s)for
installation in Installing the Master Boom
Manifold Valve (page 73) .
g028534
Figure 92
1. Flange (bypass—master
boom valve) 5. 90° flanged elbow
2. Flange (agitation valve) 6. 3-pin connector (valve
actuator—master boom
valve)
3. Clamp 7. Manifold (master boom
valve)
4. Gasket
2. Remove the flanged-head bolt and flanged
locknut that secure the master boom valve to
the valve mount and remove the valve manifold
from the machine (
Figure 93 ).
68