Toro Multi Pro ExcelaRate 5800-G, Operator'S Manual

Page: 52 / 88

Lubrication
Greasing the Sprayer
Service Interval: Every 50 hours—Lubricate the
pump.
Every 50 hours/Yearly (whichever comes first)
Grease Type: No. 2 lithium grease. Toro Premium
All-Purpose Grease is available from your Toro
Distributor.
1. Wipe the grease fitting clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing.
3. Wipe off excess grease.
Note:
The grease fittings positions are
illustrated in Figure 61 and Figure 62 .
g018935
Figure 61
Pump Center
1. Grease point
g002218
Figure 62
There are 3 fittings inside each front wheel.
1. Grease point
Greasing the Boom Hinges
Service Interval: Every 100 hours
Important:
If the boom hinge is washed with
water, clear all water and debris from the hinge
assembly and fresh grease must be applied.
Grease Type: No. 2 lithium grease.
1. Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing at
each fitting (
Figure 63 ).
52