Toro Multi Pro 5800 41623, Operator'S Manual

Page: 11 / 20

g030903
Figure 18
1. Boom switch, left boom 3. Boom switch, right boom
2. Boom switch, center boom
10. To start spraying, turn the spray icon on the
screen and drive into the spray area (
Figure 8 ).
Note:
The machine will start spraying when the
sprayer crosses into the correct spray area.
Note:
The display shows areas to be sprayed
as light gray and non-spray areas as dark gray.
If the display shows all light gray, every area can
be sprayed.
Recording Job Details
The job menu selects or sets up specific job
information associated with the chosen area. Use
this menu to store information and record and report
activity.
Recording Job Information
1. Select the job icon ( Figure 19 ).
2. Select the record-job information icon ( Figure
19 ).
3. Select the categories as needed and enter and
confirm the information.
g031535
Figure 19
1. Job-menu icon 3. List of information to
change
2. Record-job information
icon
Recording Job Notes
Use the notes area to record any information for each
job.
1. Open the job-information icon ( Figure 20 ).
2. Select the job-notes icon ( Figure 20 ).
3. Enter the information and confirm.
11