background image

October 2014© 

Toro MP5700 ROPS Cab Operator Manual

 

 

 

General Safety 

 

1. Never let an unqualified or untrained driver operate the spray vehicle. 

2. Keep a fire extinguisher, with ABC rating securely fastened in the ROPS. Maintain it and be 

familiar with its use. 

3. Do not carry passengers. 

4. Never operate the spray vehicle in a closed building for a prolonged period. Ensure adequate 

ventilation is present, as engine exhaust fumes are poisonous and can kill. 

5. Always keep sleeves, jackets or other loose clothing relatively tight and belted. Loose clothing 

may catch on moving parts and result in severe personal injury or death. 

6. Provide a first-aid kit, securely attached inside of the ROPS for use in case of accident. 

7. Never jump from the spray  vehicle. There is a  danger of tripping or falling  on  protruding 

parts. 

8. Use steps and hand holds when mounting and dismounting the spray vehicle, or for servicing 

components too high to reach from the ground. 

9. When seated in the ROPS, fasten seat belt before starting the engine. A proper seat belt must 

be worn at all times when using a ROPS. 

10. Safety devices and shields are intended to protect operators from injury or death. Under no 

circumstances should they be modified, disabled or removed. 

11. Charcoal filter should be replaced once per season. 

12. When operating spray vehicle, operator must wear respirator with cab. 

 

 

Operating Safety 

 

1. Always operate the spray vehicle controls while sitting in the operator’s seat. 

2. Lock seat in position and buckle seat belt before operating the spray vehicle. 

3. Avoid abrupt sharp turns at high speeds. 

4. On sloped terrain, do not make sharp turns as machine stability could be compromised. 

5. Operate the spray vehicle smoothly, avoid abrupt starts and stops. 

6. Keep all shields in place when operating the spray vehicle. 

7. Do not operate the spray vehicle when you are tired, sick, or impaired. 

8. Never operate the spray vehicle in confined areas; visibility next to the tractor is reduced. 

Injury to bystanders or damage to the ROPS or equipment may result. 

 

 

Safety 

 

Carefully review the procedures given in this manual and the spray vehicle operator’s manual 

with all operators annually. It is important that all operators become familiar with, and follow 

safety precautions. Operating instructions must be given to everyone using the tractor before 

operation and at least  once yearly thereafter in compliance with OSHA Regulations 1928.57 

(United States). 

Summary of Contents for MP5700












Reviews: