IV. Manual Operation
Manual Program Cycle
Use this feature to manually start your normal program cycle at any time. Each valve’s run
time will be operated for the program selected. For example, this can be used to start a
program an extra time on a particularly hot day.
1.
Set the dial to the
Manual Program Cycle
position.
2.
Select program
A
,
B
, or
C
.
3.
Press the
+
button to select
Manual Program Cycle
watering.
4.
Press the
Next
button until the desired starting valve is displayed. That valve and all
subsequent valves in the selected program will water in sequence.
5.
Turn the dial to
Run
position. The timer will complete the manual watering cycle and then
revert to automatic operation.
6.
The display will periodically show the valve number and will count down the run time for
each active valve.
7.
If desired, you may turn the dial to the
Off
position for longer than three seconds to
discontinue manual watering. Always return dial to the
Run
position to enable automatic
watering.
10
