Hood
g033707
Figure 215
1.
Hood
9.
Seal plate
17.
Hairpin cotter (2 each)
2.
Screw (2 each)
10.
Bulb seal
18.
Carriage screw (7 each)
3.
Nut (11 each)
11.
Hood support
19.
Foam seal (2 each)
4.
Intake screen
12.
Locknut (4 each)
20.
Bulb seal
5.
Plastic plug (26 each)
13.
Flat washer (3 each)
21.
Air shield
6.
Hood decal (2 each)
14.
Hood prop
22.
Clip (3 each)
7.
Screw (4 each)
15.
Screw (5 each)
8.
Catch latch (2 each)
16.
Rubber latch (2 each)
Removing the Hood
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
2. Unlatch the hood and raise it.
3. Remove the hairpin cotter (item 17 in
) from the left side frame rod.
4. Slide the hood to the left side of the machine to free the hood support from
the frame rods.
5. Remove the hood from the machine.
6. If necessary, remove the hood components (
Chassis: Service and Repairs
Page 6–40
Groundsmaster 7210
16222SL Rev C
Summary of Contents for Groundsmaster 7210
