Toro Groundsmaster 7210, Service Manual

Page: 209 / 342

Main Information Screen (continued)
provide machine information to the operator. Toggling between the main
information screens is done by pressing the right button on the InfoCenter.
The main information screens can be used to monitor the engine coolant
temperature, battery voltage, and engine RPM.
If an electrical engine fault occurs during the operation of the machine, the fault
will be displayed on the InfoCenter to notify the operator. The engine fault will be
retained in the engine ECU and can be viewed using the engine diagnostic tool.
The main menu and additional information screens can be accessed from the
InfoCenter main information screen by pressing and releasing the menu/back
button (left button) on the display. For information on the main menu and menu
item screens; refer to the
Main Menu Screen (page 5–13) .
Main Menu Screen
g035031
Figure 144
1. Main menu 4. Back button
2. Choose menu item 5. Menu items
3. Move to menu items
The main menu screen can be accessed from the InfoCenter main information
or splash screen by pressing and releasing the menu/back button (left button)
on the display. Once to the main menu screen (
Figure 144 ), navigation to the
3 different menu items can occur. Pressing the move to menu item button
(center button) allows a different menu item to be highlighted. Selection of the
highlighted item is completed by pressing the choose item button (right button).
The main menu items include service, settings, and about. These menu items
are described below.
To return to the main information screen from the main menu screen, press
the back button (left button).
Groundsmaster 7210 Page 5–13 Electrical System: InfoCenter Display
16222SL Rev C