Lift Control Manifold
g035138
Figure 122
1.
Lift cylinder
6.
O-ring
11.
Hydraulic hose
16.
O-ring
2.
Lift control manifold
7.
Hydraulic hose
12.
O-ring
17.
Bolt (2 each)
3.
Hydraulic hose
8.
O-ring
13.
Hydraulic hose
18.
Lock washer (2 each)
4.
O-ring
9.
90° hydraulic fitting
14.
O-ring
19.
Clip (2 each)
5.
Hydraulic fitting
10.
O-ring
15.
Hydraulic tee fitting
Removing the Lift Control Manifold
WARNING
Before disconnecting or doing any work on the hydraulic system,
release all the pressure in the system. Refer to
from the Hydraulic System (page 4–11)
1. Park the machine on a level surface, lower the cutting deck, shut off the
engine, set the parking brake, and remove the key from the key switch.
WARNING
If the cutting deck is in the raised position while the manifold
components are loosened, the deck may drop unexpectedly.
Ensure that the cutting deck is fully lowered and supported before
loosening the hydraulic lines, cartridge valves, or plugs from the
lift control manifold.
Groundsmaster 7210
Page 4–113
Hydraulic System: Service and Repairs
16222SL Rev C
Summary of Contents for Groundsmaster 7210
